HP 3PAR Windows 2012 and Windows Server 2008 Implementation Guide

Figure 26 Configuring the Port Personality
4. PCI Slot 2 Port 1 and Port 2 now display FCoE.
Figure 27 Port 1 and Port 2 Configured for FCoE
5. Save the changes and exit the BIOS.
Configuring an HP 3PAR StoreServ Storage Port for a FCoE Host
Connection
When setting up FCoE initiator to FC target, there is nothing unique that needs to be configured
on the HP 3PAR StoreServ Storage. The initiator coming from the host adapters through the FCoE
Forwarder switch is treated as just another Fibre Channel device connecting to the HP 3PAR
StoreServ Storage ports. The same guidelines described in “Configuring Ports on the HP 3PAR
StoreServ Storage for a Fabric Connection” (page 11) and “Setting Up a Windows Server 2008
or 2012/HP 3PAR StoreServ Storage Configuration for Fibre Channel” (page 27) must be followed
when a server with a host CNA card configured with FCoE is connected to HP 3PAR StoreServ
Storage ports.
When setting up FCoE initiator to FCoE target, the StoreServ ports must be configured for FCoE.
For notes on how to configure FCoE ports on the StoreServ, see “Configuring the HP 3PAR StoreServ
Storage for FCoE” (page 24).
60 Configuring the Windows Server 2012/2008 Host as an FCoE Initiator