HP StorageWorks P9000 Cluster Extension Software Administrator Guide (TB534-96009, February 2011)

NOTE: For more information, see “Setting P9000 Cluster Extension objects to enable rolling
disaster protection” (page 93).
Setting P9000 Cluster Extension resource properties using the GUI (Windows Server 2008/2008
R2, Server Core, and Hyper-V Server)
This section describes the procedures for setting P9000 Cluster Extension resource properties with
a GUI. You can perform these procedures through the resource configuration utility using the
Failover Cluster Management GUI or the standalone resource configuration tool. For instructions
on using the two GUI options, see the following:
• “Using Failover Cluster Management to set resource properties (Windows Server 2008/2008
R2)” (page 36)
• “Using the resource configuration tool to set resource properties (Server Core and Hyper-V
Server)” (page 37)
TIP: For information on managing P9000 Cluster Extension resources from a remote management
station through the MMC, see “Setting P9000 Cluster Extension resource properties using the
MMC” (page 42).
Using Failover Cluster Management to set resource properties (Windows Server 2008/2008 R2)
For Windows Server 2008/2008 R2, use the Failover Cluster Management GUI to set resource
properties.
1. Open Failover Cluster Management.
2. Double-click the P9000 Cluster Extension resource in the summary pane to open the Properties
window.
3. Click the Parameters tab.
4. Make the necessary parameter changes, and then click OK.
36 Configuring P9000 Cluster Extension for Windows