HP StorageWorks P9000 Cluster Extension Software Administrator Guide (TB534-96009, February 2011)

Using the resource configuration tool to set resource properties (Server Core and Hyper-V Server)
For Server Core or Hyper-V Server, use the P9000 Cluster Extension resource configuration tool
to set resource properties. When using the resource configuration tool:
• You must run the tool on a Server Core or Hyper-V cluster node. You cannot run the tool on
a remote management station.
• You cannot use the resource configuration tool to add or delete a resource.
• You can use the tool to configure multiple resources at one time. This saves time because you
can switch resources from the tool menu.
• The resource configuration tool is recommended for Hyper-V and Server Core environments
because the properties you enter are validated. When you configure P9000 Cluster Extension
resource properties from a remote management station or through the CLI, the properties you
enter are not validated.
To use the resource configuration tool:
1. Open a command window and enter ClxXpResConfig.exe.
2. Select the resource you want to change in the P9000 CLX resource menu.
3. Make the necessary parameter changes, and then click OK.
Configuring RAID Manager instance numbers for RAID Manager service
To configure RAID Manager instance numbers from the Failover Cluster Management Parameters
tab or the resource configuration tool:
1. To add an instance:
a. Click Add to open the Add RAID Manager instances window.
b. Select one or more instances and click OK.
2. To remove an instance, select it and click Remove.
3. Click OK to save your changes and close the window.
Configuring P9000 Cluster Extension resources 37