HP StorageWorks XP Cluster Extension Software Administrator Guide (T1656-96035, April 2010)

1. Click Pair ResyncMon to open the Pair/Resync Monitor Properties window.
2. Select the Use pair/resync monitor check box to set the ResyncMonitor object to YES.
3. Select the Pair/resync monitor autoRecovery check box to set the ResyncMonitorAutoRecover
object is to YES.
4. If you want to change the monitoring interval (ResyncMonitorInterval), enter a value in the Monitor
interval box.
5. Click OK to save your changes and close the Pair/Resync Monitor Properties window.
6. Click OK to save your changes and close the Properties window or Resource Configuration tool.
TIP:
You can activate ResyncMonitor from the Microsoft CLI. For example, if your XP Cluster Extension
resource is clx_fileshare, enter the following command: C:\>cluster resource
clx_fileshare /privprop ResyncMonitor=yes.
Configuring takeover actions
Pre-executables and post-executables can be defined to be executed before or after XP Cluster Extension
invokes its takeover functions.
To configure takeover actions from the Failover Cluster Management Parameters tab or the resource
configuration tool:
1. Click Pre/Post Exec to display the Pre/Post Executable Properties window.
XP Cluster Extension Software Administrator Guide 61