HP XP Cluster Extension Software Administrator Guide

NOTE: Configure this parameter for each HP XP Cluster Extension resource
associated with the VM cluster resource and the corresponding application
cluster resource in the UCF file. If the VM group contains more than one HP
XP Cluster Extension resource, and you want to use this parameter, you must
set this parameter to the same value for each HP XP Cluster Extension resource.
If you do not set the parameter to the same value, this parameter will default
to a value of NO.
Valid values YES
NO (default)
PostExecCheck
Format String
Description (Optional) The PostExecCheck object is used to configure HP XP Cluster Extension
to gather disk pair status information after the takeover procedure. This information
is passed to the post-executable. In case of a remote data center failure, it could be
time consuming to gather that information, especially if your post-executable does
not need any XP status information. The arguments passed to the post-executable
include only the local disk status if the PostExecCheck object is set to NO. See “Setting
up RAID Manager” (page 11).
Valid values YES
NO (default)
PostExecScript
Format String
Description (Optional) Specifies an executable with its full path name to be invoked after the
takeover action or failover procedure.
PreExecScript
Format String
Description (Optional) Specifies an executable with its full path name to be invoked before
the takeover action or failover procedure.
RaidManagerInstances (Required)
Format List
Description A space-separated list of RAID Manager instances that HP XP Cluster Extension can
use to communicate with the disk array. The instance numbers must be the same
among all cluster systems. HP XP Cluster Extension can alternate between the specified
instances.
Files %systemroot%\horcmX.conf
where X is the RAID Manager instance number.
ResyncMonitor
Format String
Description (Optional) Starts the pair/resync monitor to monitor the disk pair status and
resynchronize disk pairs if the ResyncMonitorAutoRecover attribute is set to YES.
Valid values YES
NO (default)
74 User configuration file and HP XP Cluster Extension objects