HP StorageWorks EVA Cluster Extension Software Installation Guide (T3667-96044, April 2010)

Upgrading EVA Cluster Extension Software for Windows
This version of EVA Cluster Extension Software supports upgrading from version 2.01.00 or later.
You can also upgrade EVA Cluster Extension concurrently with Command View EVA. Use one of the
following procedures:
• Upgrading from EVA Cluster Extension 2.01.00 or later (Windows Server 2003), page 20
• Upgrading from EVA Cluster Extension 2.01.00 or later (Windows Server 2008/2008
R2), page 22
• Upgrading EVA Cluster Extension with Command View EVA upgrade, page 23
Upgrading from EVA Cluster Extension 2.01.00 or later (Windows Server 2003)
IMPORTANT:
Perform the upgrade procedure on each node locally. EVA Cluster Extension does not support remote
upgrades.
1. Download the EVA Cluster Extension Software from SUM. You can access SUM from the ITRC
website: http://www.itrc.hp.com.
2. Verify that the new version of EVA Cluster Extension supports the version of Command View EVA
that is installed on your management servers.
Compatibility information is available on the HP SPOCK website: http://www.hp.com/storage/
spock. If you need to upgrade Command View EVA to support the new version of EVA Cluster
Extension, use the procedure in “Upgrading EVA Cluster Extension with Command View EVA
upgrade” on page 23.
3. Use the clxpmu.exe tool to capture and record the SMI-S configuration information for each
EVA management server that is used with EVA Cluster Extension. Ensure that the SMI-S login
information for each management server is available before you upgrade EVA Cluster Extension.
After the upgrade, you must enter this information using the EVA Cluster Extension configuration
tool.
a. Open a command window and run clxpmu.exe.
The clxpmu tool is available in the following directory: INSTALL_DIR\bin.
The clxpmu selection dialog appears.
Installing EVA Cluster Extension Software for Windows20