HP StorageWorks XP Cluster Extension Software Administrator Guide (T1656-96035, April 2010)

2. Update the PreExecScript, PostExecScript, and PostExecCheck values as needed, and then click
OK.
When configuring pre/post takeover executable paths, enter the full path to the script. If a script
fails, the XP Cluster Extension resource will fail.
3. Click OK to save your changes and close the Properties window or Resource Configuration tool.
Configuring Rolling Disaster Protection
To configure rolling disaster protection from the Failover Cluster Management Parameters tab or the
resource configuration tool:
1. Click Rolling Disaster to display the Rolling Disaster Protection window.
2. Add mirror units to each data center:
a. Click Add MU # to DC A.
b. Select mirror units from the list, and click OK.
c. Repeat the previous steps for Data Center B.
3. Update the BCResyncEnabledA, BCResyncEnabledB, BCResyncMuListA, and BCResyncMuListB
values as needed, and then click OK.
4. Click OK to save your changes and close the Properties window or Resource Configuration tool.
NOTE:
For more information, see “Setting objects to enable rolling disaster protection” on page 141.
Setting XP Cluster Extension resource properties using the MMC
If you are using Server Core or Hyper-V Server, you can manage a cluster remotely by using the MMC
to run Failover Cluster Management.
Configuring XP Cluster Extension for Windows62