HP StorageWorks XP Cluster Extension Software Administrator Guide (T1656-96035, April 2010)

NOTE:
When you configure XP Cluster Extension resource properties from a remote management station
through the MMC, which uses the standard Microsoft Properties tab, the properties you enter are not
validated, so you must enter the property values accurately, and verify them against the XP Cluster
Extension documentation.
When you use this option, you will see the default Microsoft properties page instead of the XP Cluster
Extension Parameters tab. For more information about using the MMC, see “Remote management of
XP Cluster Extension resources in a cluster (Windows Server 2008/2008 R2)” on page 73 and your
Microsoft documentation.
Setting XP Cluster Extension resource properties using the CLI
The cluster commands in this section can be used with Windows Server 2003, Windows Server
2008/2008 R2, Server Core, or Hyper-V Server.
The MSCS default properties for a resource can be changed using the following command: cluster
resource resource_name /privprop [object_name=value|"value1 value2 ..."].
NOTE:
When you configure XP Cluster Extension resource properties using the CLI, the properties you enter
are not validated, so you must enter the property values accurately, and verify them against the XP
Cluster Extension documentation.
You can display all attributes of the XP Cluster Extension resource clx_fileshare with the following
command:
cluster resource clx_fileshare /privprop
XP Cluster Extension Software Administrator Guide 63