HP XP Cluster Extension Software Administrator Guide

2. Update the PreExecScript, PostExecScript, and PostExecCheck values as needed, and then
click OK.
When configuring pre/post takeover executable paths, enter the full path to the script. If a
script fails, the HP XP Cluster Extension resource will fail.
3. Click OK to save your changes and close the Properties window or Resource Configuration
tool.
Configuring Rolling Disaster Protection
To configure rolling disaster protection from the Failover Cluster Management HP XP CLX Settings
tab or the resource configuration tool:
1. Click Rolling Disaster to display the Rolling Disaster Protection window.
2. Add mirror units to each data center:
a. Click Add MU # to DC A.
b. Select mirror units from the list, and click OK.
c. Repeat the previous steps for Data Center B.
3. Update the BCResyncEnabledA, BCResyncEnabledB,BCResyncMuListA, and BCResyncMuListB
values as needed, and then click OK.
4. Click OK to save your changes and close the Properties window or Resource Configuration
tool.
NOTE: For more information, see “Setting HP XP Cluster Extension objects to enable rolling
disaster protection” (page 80).
Setting HP XP Cluster Extension resource properties using the MMC
If you are using Server Core or Hyper-V Server, you can manage a cluster remotely by using the
MMC to run Failover Cluster Management.
NOTE: When you configure HP XP Cluster Extension resource properties from a remote
management station through the MMC, which uses the standard Microsoft Properties tab, the
properties you enter are not validated, so you must enter the property values accurately, and verify
them against the HP XP Cluster Extension documentation.
When you use this option, you will see the default Microsoft properties page instead of the HP XP
Cluster Extension HP XP CLX Settings tab. For more information about using the MMC, see “Remote
management of HP XP Cluster Extension resources in a cluster (Windows Server 2008/2008
R2/2012/2012 R2)” (page 43) and your Microsoft documentation.
32 Configuring HP XP Cluster Extension