HP StorageWorks EVA Cluster Extension Software Administrator Guide (T3667-96045, April 2010)

2 Configuring EVA Cluster Extension for
Windows
After installing EVA Cluster Extension, use the configuration tool to define the EVA Cluster Extension
setup configuration. Use Cluster Administrator (Windows Server 2003), Failover Cluster Management
(Windows Server 2008/2008 R2), or cluster commands in the CLI to add and configure resources.
NOTE:
For a list of supported operating system versions, see the HP SPOCK website:
http://www.hp.com/storage/spock.
Integrating EVA Cluster Extension with MSCS
To integrate EVA Cluster Extension with MSCS:
1. Define the setup configuration for the EVA Cluster Extension application. For instructions, see
“Configuring EVA Cluster Extension” on page 25.
2. Add an EVA Cluster Extension resource. For instructions, see “Adding an EVA Cluster Extension
resource” on page 29.
3. Configure the EVA Cluster Extension resource. For more information, see “Configuring EVA
Cluster Extension resources” on page 32.
4. Add dependencies on the EVA Cluster Extension resource. For instructions, see “Adding
dependencies on an EVA Cluster Extension resource” on page 46.
Configuring EVA Cluster Extension
After installation, you must define the setup configuration using the EVA Cluster Extension configuration
tool.
You can configure EVA Cluster Extension with the GUI or the CLI. Use the following instructions for
the GUI. For instructions on performing EVA Cluster Extension configuration tasks with the CLI, see
“Defining EVA Cluster Extension configuration information using the CLI” on page 28.
NOTE:
If you use the CLI to define the setup configuration, you must use the import and export features to
copy the clxevacfg file to the other nodes in the cluster.
EVA Cluster Extension Software Administrator Guide 25