HP StorageWorks EVA Cluster Extension Software Administrator Guide (T3667-96045, April 2010)

Command-line utilities
Command-line utilities are also included with EVA Cluster Extension to allow configuration of EVA
Cluster Extension on all platforms for both the CLI (clxevarun) and cluster integration.
clxconf
Description Use clxconf to manually retrieve the consistency set object paths for a DR
group and place them in a file called clxobjectpaths.cfg located in
the EVA Cluster Extension conf directory.
• Windows: %HPCLX_EVA_PATH%
• Linux: /etc/opt/hpclxeva/conf
The consistency set object paths are required for clxevarun, RHCS, and
SLE HA integration.
NOTE:
For RHCS and SLE HA, the file equivalent to the user
configuration file UCF.cfg is called the EVA Cluster Extension
resource configuration file.
clxconf is used as part of the EVA Cluster Extension configuration process
for the CLI, RHCS, and SLE HA integration. After clxconf places information
in clxobjectpaths.cfg, that information must be copied to UCF.cfg
and the EVA Cluster Extension resource configuration file.
Syntax clxconf –smis [–sg file_name package_name]
Operands Required parameter for clxevarun, RHCS, and
SLE HA integration
-smis
-sg Specify Linux integration
file_name EVA Cluster Extension resource configuration file
(CLXEVA.config)
package_name Application name configured in the EVA Cluster Ex-
tension resource configuration file (CLXEVA.config)
Example 1
clxevarun configuration
# clxconf -smis
In this example, clxconf assumes that one or more APPLICATION tags
are defined in the UCF.cfg file and have specified all necessary objects,
including the DeviceGroup object, to map the DR group to the application
service.
EVA Cluster Extension Software Administrator Guide 91