HP StorageWorks P9000 Cluster Extension Software Installation Guide (TB534-96008, February 2011)

Cluster-wide installation can fail to obtain the remote installation status if a remote node becomes
unreachable. This can happen if the network connection or remote cluster node fails. If this type
of failure occurs, find the error code in the file %WINDIR%\CLXSetup_nodename.result,
available on the unreachable node, and then locate the error in “Windows remote installation
error codes” (page 16).
In addition to showing the results of the installation process, the .result file helps you identify
the status of remote maintenance if cluster level maintenance (modify, repair, remove) fails.
NOTE: If the .result file is not found on the remote cluster node, run the P9000 Cluster Extension
setup by logging on to the remote cluster node locally.
If you receive an error similar to Another installation is already in progress…,
then stop the process IDriver.exe (and msiexec.exe), or reboot the node and rerun the
P9000 Cluster Extension setup locally.
Example
If you start a cluster-wide installation on Node1 of a 3-node cluster, with all nodes selected for
installation, and the network connection to Node2 and Node3 is lost by Node1, then the
cluster-wide installation process cannot get the status of the remote node installation. In this situation,
use the %WINDIR%\CLXSetup_nodename.result file to obtain the remote node installation
status. To check the .result file for the remote nodes, log on to Node2 and Node3, and access
the file %WINDIR%\CLXSetup_nodename.result on each node. Compare the errors in the
file to the information in “Windows remote installation error codes” (page 16).
Table 1 Windows remote installation error codes
Corrective actionDescriptionERROR code
N/AInstallation was successful on the local
cluster node.
ERROR_INSTALLATION_SUCCESS
N/AP9000 Cluster Extension was
successfully removed from the local
cluster node.
ERROR_REMOVAL_SUCCESS
N/AP9000 Cluster Extension was
successfully repaired on the local
cluster node.
ERROR_REPAIR_SUCCESS
N/AP9000 Cluster Extension was
successfully modified on the local
cluster node.
ERROR_MODIFY_SUCCESS
Run the setup on the local cluster node.Setup failed on the local cluster node.
The silent input file is corrupted.
ERROR_READ_INPUT_FILE_FAILED
Run the setup on the local cluster node.Setup failed on the local cluster node.
Internal Error. Could not invoke the DLL.
ERROR_INVALID_HANDLE
Run the setup on the local cluster node.Setup failed on the local cluster node.
The silent input file is corrupted or
could not be found.
SILENT_INPUT_FILE_CORRUPTED
Run the setup on the local cluster node.Setup failed on the local cluster node.
Could not find the local node name.
LOCAL_NODE_NAME_NOT_FOUND
16 Installing P9000 Cluster Extension Software for Windows