HP XP Cluster Extension Software Administrator Guide

NOTE: In the case of a CSV disk, the HP XP CLX Settings tab in the properties window is visible
only if that CSV disk is dependant on a "Cluster Extension XP" resource.
Alternatively, you can use HP XP Resource Configuration Tool (ClxXPResConfig.exe) to configure
the CLX resource on which the CSV is dependent.
Using the resource configuration tool to set resource properties (Server Core and Hyper-V Server)
For Server Core or Hyper-V Server, use the HP XP Cluster Extension resource configuration tool to
set resource properties. When using the resource configuration tool:
• You must run the tool on a Server Core or Hyper-V cluster node. You cannot run the tool on
a remote management station.
• You cannot use the resource configuration tool to add or delete a resource.
• You can use the tool to configure multiple resources at one time. This saves time because you
can switch resources from the tool menu.
• The resource configuration tool is recommended for Hyper-V and Server Core environments
because the properties you enter are validated. When you configure HP XP Cluster Extension
resource properties from a remote management station or through the CLI, the properties you
enter are not validated.
To use the resource configuration tool:
1. Open a command window and enter ClxXpResConfig.exe.
2. Select the resource you want to change in the XP CLX resource menu.
3. Make the necessary parameter changes, and then click OK.
Configuring HP XP Cluster Extension resources 27