3PAR Service Processor User's Guide (320-200247 Rev B, April 2011)

3.10
Managing Date and Time Settings
3PAR Service Processor User’s Guide
3.12 Managing Date and Time Settings
Use the SP System Date/Time submenu to alter the date, time, and time zone for the Service
Processor (SP).
To access the SP System Date/Time submenu:
1 From the SPMAINT main menu, type 1 for SP Control/Status and press
ENTER.
2 Type 11 for SP Date/Time/Geographical Location maintenance and press
ENTER.
The following subsections describe how to perform tasks related to each of the functions
available through the SP System Date/Time/Geographical Location submenu.
3.12.1 Changing the Date
To change the Service Processor date:
1 From the SP System Date/Time submenu, type 1 for Change the Date and press
ENTER.
2 When prompted, type the new date in YYYY/MM/DD format and press
ENTER.
3 When prompted, type y and press
ENTER to confirm the date change.
3.12.2 Changing the Time
To change the Service Processor time:
1 From the SP System Date/Time submenu, type 2 for Change the Time and press
ENTER.
2 When prompted, type the new time in 24-hour format (HH:MM) and press
ENTER.
3 When prompted, type y and press
ENTER to confirm the time change.
CAUTION: If using an NTP server, do not change the time setting for the SP unless
the SP is not synchronized with the NTP server.