3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

8.2
Using the Component LEDs
InForm OS Version 2.2.4
3PAR Confidential
8.1 Using the Component LEDs
InServ Storage Server components have LEDs to indicate that the hardware is functioning
properly and to help identify errors. These LEDs serve as tools for diagnosing basic hardware
problems.
You can quickly identify hardware problems by simply examining the LEDs on all the
components. Use the tables and diagrams in the following sections to verify the hardware is
functioning properly.
If you detect any problems during inspection of the LEDs, contact your 3PAR Authorized
Service Provider.
8.1.1 Bezel LEDs
LEDs are provided at the front of the F-Class Storage Server on the bezel for quick assessment
of node health. LEDs are provided as follows:
Figure 8-1. Bezel LEDs
Consult Table 8-1 for bezel LED meanings.
0722_L_R2
NODE 0 NODE 10 1
NODE 2 NODE 32 3
Fan 2 Status LED
Fan 3 Status LED
Node 2 Status LED
Node 3 Status LED
Fan 0 Status LED
Fan 1 Status LED
Node 0 Status LED
Node 1 Status LED