3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

8.7
Using the Component LEDs
InForm OS Version 2.2.4
3PAR Confidential
2 Gb Link
Speed LED
Steady
green light
Indicates the following:
■ Test state (5 seconds), if:
◆ Power On LED is steady green.
◆ Power Supply/Cooling/Temperature Fault LED is steady
amber.
◆ System Fault LED is steady amber.
◆ Invalid Address LED is steady amber.
■ 2 Gb/s drive loop is selected, if Power On LED is steady green.
Flashing
green light
One or more drives are bypassed on at least one loop.
No green
light
Indicates the that 5 V aux is present, overall power fail, if Power
On LED is green and all other LEDs are off.
Invalid
Address LED
Steady
amber light
Indicates test state (5 seconds), if:
■ Power On LED is steady green.
■ Power Supply/Cooling/Temperature Fault LED is steady amber.
■ System Fault LED is steady amber.
■ 2 Gb Link Speed LED is steady amber.
Flashing
amber light
Indicates an invalid address mode ID switch setting if Power On
LED is steady green.
Table 8-2. Drive Chassis OPs Panel LED Meanings (continued)
LED Appearance Meaning