3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

8.17

Using the Component LEDs

InForm OS Version 2.2.4

3PAR Confidential

8.1.8 Emulex Fibre Channel Port LEDs

The Emulex Fibre Channel adapter contained in the controller node also contain Fibre Channel

port LEDs. Two port Emulex Fibre Channel adapters are only used in an InServ F-Class Storage

Server (Figure 8-10).

Figure 8-10. Emulex 2-Port Fibre Channel LEDs

Consult Table 8-9 for Emulex Fibre Channel adapter LED meanings.

Green 2x

Yellow 2x

0269_L_R2

(Port 1*)

(Port 2*)

*These ports correspond to the numbering as reported by the InForm OS.

Node Frame

Table 8-9. Fibre Channel Port Status LED Indications (Emulex 2-Port Adapter)

Yellow LED Green LED Port Status

3PAR Internal Test Only Off Wake-Up Failure (dead device)

3PAR Internal Test Only On Normal - Link up at 1-4 GB/sec

3PAR Internal Test Only Slow Blink Normal - Link Down