3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

8.20
Using the Component LEDs
InForm OS Version 2.2.4
3PAR Confidential
Figure 8-13. Supermicro Service Processor LEDs
Consult Table 8-11 to verify proper functioning of service processor displays.
Table 8-11. Supermicro Service Processor Front-Panel Displays
LED Appearance Meaning
Power No light Indicates that the service processor is off.
Steady green light Indicates that the service processor is on.
Hard Disk No light Indicates that there is no hard drive
activity.
Flashing amber light Indicates that there is hard drive activity.
NIC Port 2 No light Indicates that the port is not connected.
Steady green light Indicates that the port is connected.
Flashing green light Indicates that there is network activity.
NIC Port 1 No light Indicates that the port is not connected.
Steady green light Indicates that the port is connected.
Flashing green light Indicates that there is network activity.
Hard Disk Drive LED
NIC Port 2 LED
NIC Port 1 LED
Power LED
Overheat LED
Power Button
0637_L_R1
Reset Button