3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

9.12
Using the Component LEDs
InForm OS Version 2.2.4
3PAR Confidential
9.1.5 Controller Node LEDs
InServ E-Class Storage Server controller nodes contain the following LEDs:
Figure 9-7. Controller Node LEDs
Consult Table 9-6 to verify proper functioning of controller nodes.
Table 9-5. Drive Magazine LED Displays
LED Appearance Meaning
Activity Steady green light Indicates that drive power is present.
Blinking green light Indicates drive activity.
No light Indicates no drive is present.
Fault Steady amber light Indicates drive fault.
No light Indicates the following:
■ No drive is present.
■ Drive power is on.
■ Drive activity.
Flashing amber
light
Indicates the drive is bypassed by the FCAL module.
0200_L_R1
Status LED
Hot-Plug LED
Ethernet Activity LEDs