3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

9.14
Using the Component LEDs
InForm OS Version 2.2.4
3PAR Confidential
9.1.5.1 LSI Logic Fibre Channel Port LEDs
When present, the LSI Logic Fibre Channel adapters in the InServ E-Class Storage Server
controller nodes contain Fibre Channel port LEDs. The LSI Logic adapters have two-ports.
Figure 9-8. LSI Logic 2-Port Fibre Channel Port LEDs
Each LSI Logic port in the Fibre Channel adapter have LEDs that are either off, green, or amber,
depending on condition.
Table 9-7 on page 9.14 lists all of the LED conditions for the 2-Port LSI Logic Fibre Channel card.
Consult this table to verify proper functionality of the Fibre Channel ports.
=
0257_L_R1
Amber LEDGreen LED
Table 9-7. Fibre Channel Port Status LED Indications (LSI Logic 2-Port Adapter)
LED Condition Port Status
Steady amber light Link down or cable disconnected
Off Link up
Flashing green light Indicates I/O activity