3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

9.15

Using the Component LEDs

InForm OS Version 2.2.4

3PAR Confidential

9.1.5.2 Emulex Fibre Channel Port LEDs

The Emulex Fibre Channel adapter contained in the controller node also contain Fibre Channel

port LEDs. The two-port Emulex Fibre Channel adapters are only used in InServ E-Class Storage

Servers (Figure 9-9).

Figure 9-9. Emulex 2-Port Fibre Channel LEDs

Consult Table 9-8 to verify proper function of the Emulex Fibre Channel adapter LED.

Table 9-8. Emulex Fibre Channel Port Status LED Indications

Yellow LED Green LED Port Status

Off Off Wake-up failure (dead device)

On Off POST Failure (dead board)

Green 2x

Yellow 2x

0269_L_R2

(Port 1*)

(Port 2*)

*These ports correspond to the numbering as reported by the InForm OS.

Node Frame