3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

9.16
Using the Component LEDs
InForm OS Version 2.2.4
3PAR Confidential
9.1.5.3 QLogic iSCSI Port LEDs
When present, the QLogic iSCSI adapter is provided with two ports. There is one LED for each
port (Figure 9-10).
Slow Blink Off Wake-up failure monitor
Fast Blink Off POST failure
Flashing Off POST processing in progress
Off On Failure while functioning
On On Failure while functioning
1 Blink On 1Gb Link rate - Normal, link up
2 Blinks On 2Gb Link rate - Normal, link up
3 Blinks On 4Gb Link rate - Normal, link up
Off Slow Blink Normal - Link down or not started
Slow Blink Slow Blink Off-line for download
Fast Blink Slow Blink Restricted off-line mode (Waiting restart)
Flashing Slow Blink Restricted off-line mode (Test active)
Table 9-8. Emulex Fibre Channel Port Status LED Indications (continued)
Yellow LED Green LED Port Status