3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

9.18
Using the Component LEDs
InForm OS Version 2.2.4
3PAR Confidential
Figure 9-11. Gigabit Ethernet Adapter LEDs
Consult Table 9-10 to verify the proper functioning of Gigabit Ethernet adapter LEDs.
9.1.5.5 Controller Node Power Supply LEDs
InServ E-Class Storage Server controller node power supply units are located on both sides of
the controller nodes. Each controller node has a corresponding power supply (e.g. node 0,
power supply 0; node 1, power supply 1). The battery is integral to the controller node power
supply. The LEDs are located on the rear of the power supply units as follows (Figure 9-12):
0352_L_R1
Gigabit Ethernet Adapter
Speed LED ACT/LINK LED
Table 9-10. Gigabit Ethernet Adapter Indicators
LED Appearance Meaning
ACT/LNK Steady green light Valid link partner.
Flashing green light Data activity.
No light ACT/LNK is off.
Speed No light 10 MB/sec.
Steady green light 100 MB/se.
Steady orange light 1000 MB/sec.