3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

11.28
InForm OS Version 2.2.4
3PAR Confidential
SUGGESTED ACTION
The PD specified in the alert has been marked failed because it has unsupported drive
firmware on it. Use the CLI command showpd <pd_id> to confirm the disk is still in this state.
Contact your local service provider to reload the correct firmware on the disk.
STATE 12
Invalid Block Size
SUGGESTED ACTION
The PD specified in the alert has been marked failed because it is reporting an unsupported
block size. Use the CLI command showpd <pd_id> to confirm the disk is still in this state.
Contact your local service provider for possible disk replacement.
STATE 13
Invalid Cage
SUGGESTED ACTION
The PD specified in the alert has been marked temporarily failed because it does not have a
known cage position. Use the CLI command showpd <pd_id> to confirm the disk is still in this
state.
If the error persists, contact your local service provider for possible disk replacement.
STATE 14
Prolonged Not Ready
SUGGESTED ACTION
The PD specified in the alert has been marked failed because it has been marked not ready for
more than four minutes. Use the CLI command
showpd <pd_id> to confirm the disk is still in
this state.
Contact your local service provider for possible disk replacement.
STATE 15
Prolonged Missing