3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

11.29
InForm OS Version 2.2.4
3PAR Confidential
SUGGESTED ACTION
The PD specified in the alert has been marked failed because it has been marked missing for
more than four minutes. Use the CLI command showpd <pd_id> to confirm the disk is still in
this state.
Please contact your local service provider for possible disk replacement.
STATE 16
Invalid Media
SUGGESTED ACTION
The PD specified in the alert has been marked media-failed. Use the CLI command showpd
<pd_id>
to confirm the disk is still in this state.
A disk might be marked failed because the media on certain sectors is marked bad. Other
reason codes below might help in further analysis of why the disk has its media marked invalid.
STATE 17
Failed Hardware
SUGGESTED ACTION
A disk might be marked media-failed because the hardware reports media failures. Contact
your local service provider to replace the disk.
STATE 18
Smart Threshold Exceeded
SUGGESTED ACTION
A disk might be marked media-failed if it has been reporting disk aborts with error code 21 to
specify that the threshold for SMART errors has been exceeded.
Contact your local service provider to replace the disk.
STATE 19
Multiple Chunklets Media Bad
SUGGESTED ACTION
A disk might be marked media-failed because more than six chunklets on that disk have
reported media-errors.
Contact your local service provider to replace the disk.