3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

11.90
InForm OS Version 2.2.4
3PAR Confidential
MESSAGE CODE
0x1e0002
TYPE
Invalid cage configuration
MESSAGE 1
Cage <cage_id> (WWN <cage_wwn>) is not directly attached to node on
either loop.
MESSAGE 2
Cage <cage_id> (WWN <cage_wwn>) is paired with different partners.
SideA with <cage_name> and sideB with <cage_name>.
MESSAGE 3
Can’t tell cage order on port <node:port:slot>.
MESSAGE 4
More than 2 cages reported port <node:port:slot>.
MESSAGE 5
<cage_id> reported twice on port <node:port:slot>. This means that both
loops of this cage are daisy chained together.
MESSAGE 6
<port_number> of <cage_id> on both ports <node:port:slot> and
<node:port:slot>.
MESSAGE 7
DC2 <cage_name> in daisy chain config with <cage_name> on port
<node:port:slot>.
MESSAGE 8
<cage_name> in daisy chain config with <cage_name> on port <node:port:slot>. Mixed cage
types are not allowed in daisy chain configuration.
SUGGESTED ACTION FOR MESSAGE 1-8
Check all fibre channel cable connections. Contact your local service provider to reconfigure
the drive cages.