3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

11.15
InForm OS Version 2.2.4
3PAR Confidential
MESSAGE CODE
0x3700fa
TYPE
Component state change
MESSAGE
Remote Copy Volume <remote_copy_volume_id> <volume_name> Failed (<list
of states>)
STATE 1
Write To Secondary Volume Failed
SUGGESTED ACTION
This message means that there was an error attempting to write to a secondary volume, and
thus the primary side volume group was stopped. Determine what caused the write error was
and attempt to repair the problem and restart the group.
STATE 2
Sync Failed
SUGGESTED ACTION
Indicates an attempt to synchronize a remote copy volume has failed. Try and determine why
this occurred, i.e. volume group was stopped by a CLI command, there was a network failure, a
write error on the secondary volume, etc., and correct the problem. Once the problem is
resolved, the volume can be synchronized using syncrcopy.