3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

A.2
Safety Precautions
InForm OS Version 2.2.4
3PAR Confidential
A.1 Safety Precautions
For your safety, for the safety of others, and to protect system data and equipment, always
follow the instructions in this manual while installing, maintaining, troubleshooting, and
upgrading InServ Storage Servers and their components.
In addition, please take the following precautions:
■ Install and maintain storage servers and their components in a restricted access location,
limiting access to storage server equipment, software, and documentation.
■ Follow all instructions, warnings, and cautions printed on individual storage server
components. Those instructions take precedence over statements made in this guide.
■ Before installing a storage server, verify that the voltage and frequency of the power
sources at the operating sites matches the voltage and frequency indicated on the system’s
electrical rating label.
A.2 Safety Agency Compliance Notices
InServ Storage Servers comply with UL® 1950 and IEC 60950 safety standards for ITE
equipment. requirements. For your safety, observe the notices that follow.
A.2.1 System Placement and Security
Install and maintain storage servers and their components in a restricted access location,
limiting access to storage server equipment, software, and documentation.
WARNING: This unit to be installed in an restricted access location.
ACHTUNG: Diese Einheit darf nicht frei zugänglich installiert werden.