3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

6.12
Using the Component LEDs
InForm OS Version 2.2.4
3PAR Confidential
6.1.5 QLogic iSCSI Port LEDs
The QLogic iSCSI adapter contains two ports. There is one LED for each port as shown in
(Figure 6-6).
Figure 6-6. iSCSI Adapter LEDs
Consult Table 6-5 to verify the proper functioning of QLogic iSCSI adapter LEDs.
Table 6-4. 3PAR Fibre Channel Port Status LED Indications (3PAR 4-Port Adapter)
LED Appearance Meaning
No light Wake-up Failure (dead device).
Steady green light Normal -- Link up at 2-4 GB/sec.
Flashing green light Link down or not connected.
0514_L_R2
LEDs (2x)
Port 2
Port 1