3PAR CIM API Programming Reference for InForm OS 2.3.1 (320-200164 Rev B, February 2010)

5.95
Location Subprofile
CIM API Programming Reference
 PreCall – FALSE
 ReturnValue - contains string representation of the method's return value, e.g.,
“Failed”
 ReturnValueType - the type of the method return value. This is always “uint32” (9)
since all replication methods that we support have a return value type of uint32.
5.10.6.3 TPD_OwningJobElement
Association between TPD_StorageConfigurationService and TPD_ConcreteJob.
5.10.6.4 TPD_AffectedJobElement
Association between TPD_ConcreteJob and one or more TPD_StorageVolume affected by
the job. The affected volumes are the source and target volumes, with the exception of update
snapspace task, where the affected volumes are those snapshots that are being updated.
5.10.6.5 TPD_AssociatedJobMethodResult
Association between TPD_ConcreteJob and TPD_MethodResult.
5.10.6.6 Indications
The following Job Control subprofile indication is supported:
“SELECT * FROM CIM_InstModification WHERE SourceInstance ISA
CIM_ConcreteJob”.
5.11 Location Subprofile
The Location subprofile models information about the location of a physical device. In the case
of the Array profile, it is used to provide information about the physical location of a storage
array. The information provided through this subprofile is the physical location of the InServ
Storage Server.
For detailed information regarding the Location subprofile, refer to SMI-S at http://
www.snia.org.
5.11.1 Location Subprofile CIM Classes
Table 5-48 shows the Location subprofile key CIM classes: