3PAR CIM API Programming Reference for InForm OS 2.3.1 (320-200164 Rev B, February 2010)

5.97
Software Subprofile
CIM API Programming Reference
5.12.2 Supported Methods
None.
5.13 Software Subprofile
The Software subprofile models information on installed controller software, including version
information, build numbers, and manufacturer identification. The information provided
through this subprofile is specific for the version of the InForm OS installed on the
TPD_ComputerSystem that represents the InServ Storage Server.
For detailed information regarding the Software subprofile, refer to SMI-S at http://
www.snia.org.
5.13.1 Software Subprofile CIM Classes
Table 5-51 shows the Software subprofile key CIM classes:
Table 5-50. Multiple Computer System Subprofile CIM Classes
Class Description
TPD_StorageSystem Represents the storage array as a whole.
TPD_NodeSystem Represents a Controller Node on an InServ Storage System.
TPD_NodePairSystem Represents a pair of Controller Nodes on an InServ Storage
System.
TPD_NodePairRedundancySet Members of this set are node pairs that make up the InServ
Storage System cluster.
TPD_RedundancySet Members of this set are Controller Nodes that make up a node
pair within the InServ Storage System.