3PAR CIM API Programming Reference for InForm OS 2.3.1 (320-200164 Rev B, February 2010)

5.116
Masking and Mapping Subprofile
CIM API Programming Reference InForm OS Version 2.3.1
Parameters “Override” and “NoVCN” are optional. All other combinations of the parameters
are rejected.
There are two use cases of
ExposeDefaultLUs() method (See Table 5-60 on page 5.116):
1 Creating a new default view: export a list of volumes to all host HBAs that are
connected to the specified list of target ports. This creates a “port-present” VLUN. This case
is indicated by NULL input
ProtocolController parameter.
2 Add LUs to a view: add volumes to an existing SPC view. (This feature is not supported in
version 2.3.1.)
5.14.5.4 HideDefaultLUs (Removing Port-Present VLUNs)
HideDefaultLUs() is the similar to HidePaths, except HideDefaultLUs works with
‘default SPCs’, and hides volumes from all initiators through a list of target ports through the
‘default view’ SPC. This default SPC is identified by an association to
StorageHardwareID
with StorageID property set to null (not zero-length string).
Table 5-60. ExposeDefaultLUs Use Cases
Use
Cases
LUNames TargetPortIDs DeviceNumbers DeviceAccesses
ProtocolCon
trollers
(On input)
Create a
new
default
view
Mandatory Mandatory Mandatory for
2.2.4 and
before, optional
for 2.3.1 and
beyond.
Mandatory NULL
Add LUs
to a
view [
(Not
support
ed in
2.3.1)
Mandatory NULL Mandatory Mandatory Contains a
single
default SPC
ref