3PAR CIM API Programming Reference for InForm OS 2.3.1 (320-200164 Rev B, February 2010)

5.127
HideLUsFromStorageHardwareIDCollection (Removing Host-Sees VLUNs)
CIM API Programming Reference
SAPAvailableForElement
represents a one-to-one relationship between SPC and
SCSIProtocolEndPoint because only one host can connect to one target port. When one
InServ port is connected to a switch in a fabric, there can be multiple hosts connecting to InServ
via the same target port (1-to-many association). When more than one InServ port are
connecting to the fabric with multiple hosts in the same zone, this association becomes n-to-n
relationship.
5.15.3 iSCSISAPAvailableForElement
This class replaces PrococolControllerForPort in SMI-S 1.0.2.
TPD_iSCSISAPAvailableForElement associates TPD_iSCSIPrococolController to
TPD_iSCSIPrococolEndPoint (iSCSI target port). When a host is directly attached to InServ,
iSCSISAPAvailableForElement represents a one-to-one relationship between SPC and
iSCSIPrococolEndPoint because only one host can connect to one target port. When one
InServ port is connected to a switch in a fabric, there can be multiple hosts connecting to InServ
via the same target port (1-to-many association). When more than one InServ port are
connecting to the fabric with multiple hosts in the same zone, this association becomes n-to-n
relationship.
5.15.4 SCSIPrococolController
SCSIPrococolController (SPC) represents the view described in SMI-S View and Paths on
page 5.101 for a Fiber-channel host.
5.15.5 iSCSIPrococolController
iSCSIPrococolController (SPC) represents the view described in SMI-S View and Paths on
page 5.101 for an iSCSI host.
5.15.6 SCSIPrococolEndpoint
SCSIPrococolEndpoint (subclass of LogicalPort) models SCSI aspect of an FC port. It is
associated with one or more
FCPorts. One instance of this class must be created for each
target port (connecting to host or fabric).
Table 5-65. Properties for SCSIPrococolEndpoint
Properties Values
string Name Target port WWN