3PAR CIM API Programming Reference for InForm OS 2.3.1 (320-200164 Rev B, February 2010)

5.132
FC Target Ports Subprofile
CIM API Programming Reference InForm OS Version 2.3.1
5.16 FC Target Ports Subprofile
The FC Target Ports subprofile models Fibre Channel specific aspects of a target storage system.
This subprofile provides information about FC ports on an InServ Storage Server that are
connected to hosts or FC switches.
For detailed information regarding the FC Target Ports subprofile, refer to SMI-S at http://
www.snia.org.
5.16.1 FC Target Ports Subprofile CIM Classes
Table 5-69 describes the FC Target Ports subprofile key CIM classes:
5.16.2 Supported Methods
None
5.17 FC Initiator Ports Subprofile
The FC Initiator Ports subprofile models Fibre Channel specific aspects of a storage system. This
subprofile provides information about the backend Fibre Channel ports that are used to
connect InServ Storage Server Controller Nodes to backend Disk Enclosures (Drive Cages).
For detailed information regarding the FC Target Ports subprofile, refer to SMI-S at http://
www.snia.org.
Table 5-69. FC Target Ports Subprofile CIM Classes
Class Description
TPD_StorageSystem The storage array on which the target ports reside.
TPD_SCSIProtocolFCEndpoint A SCSI transport endpoint. In this context, this represents a
target port on the InServ Storage System.
TPD_FCPort A Fibre Channel Port residing on the TPD_ComputerSystem.
TPD_SCSIController Represents the SCSI view of ports as seen by SCSI initiators.