3PAR CIM API Programming Reference for InForm OS 2.3.1 (320-200164 Rev B, February 2010)

7.5
Health Management
InForm OS Version 2.3.1 CIM API Programming Reference
7.1.1.6 Properties for TPD_PhysicalMemory
7.1.1.7 Properties for TPD_IDEDrive
7.1.2 Supported Methods
Table 7-1 shows the supported methods of the StorageSystem:
Table 7-6. TPD_PhysicalMemory Properties
Property Description
Slot Slot number in which this memory card is inserted.
SlotID Connector ID where this card is inserted (such as J1101).
OperationalStatus Overall status of the memory card. Refer to SMI-S for possible values
of this property.
OtherOperationalStatus 3PAR specific operational status for the memory card.
Table 7-7. TPD_IDEDrive Properties
Property Description
Position The position number of this component.
OperationalStatus Overall status of the IDE Drive. Refer to SMI-S for possible values of
this property.
OtherOperationalStatus 3PAR specific operational status for the IDE Drive.
Table 7-8. Methods for TPD_StorageSystem
Method Description
modifyInstance() Provides the ability to set owner and contact information for the
StorageSystem.