3PAR CIM API Programming Reference for InForm OS 2.3.1 (320-200164 Rev B, February 2010)

A.75
3PAR_TPDCage.mof
InForm OS Version 2.3.1 CIM API Programming Reference
"10", "11", "12", "13", "14", "15", "16", "17", "18", "19",
"20", "21", "22", "23", "24", "25", "26", "27", "28", "29",
"30", "31", "32", "33"},
Values {"Unknown", "OK", "Warning,High LIP",
"Warning,Burst Word Errors", "Warning,High Word Errors",
"Warning,High CRC Errors", "Warning,High Clock Delta",
"Bypass", "No SFP Present", "Bypass,Tx Fault", "Bypass,LIP",
"Bypass,Data Timeout", "Bypass,RX Loss", "Bypass,Sync Loss",
"Bypass,PTFI", "Manual Bypass, System Manager",
"Manual Bypass,Redundant Port Connection",
"Manual Bypass,Stall Threshold",
"Manual Bypass,Burst Word Error Threshold",
"Manual Bypass,High Word Error Threshold",
"Manual Bypass,Burst CRC Error Threshold",
"Manual Bypass,High CRC Error Threshold",
"Manual Bypass,High Clock Delta Threshold",
"Manual Bypass,Mirror Configuration",
"Manual Bypass,Host Management Rules",
"Manual Bypass,Trunked Cabling Errors",
"Manual Bypass,TBD", "Manual Bypass,Looped Back",
"Manual Bypass,Insert Oscillation",
"Manual Bypass,Burst LIP Threshold",
"Manual Bypass,High LIP Threshold",
"Manual Bypass, Diagnostic Transmit",
"Manual Bypass,Drive Bypass", "Manual Bypass,Drive Fault"} ]
uint16 LoopState[];
[Description ("Status of the firmware on the Interface Card processor."),
ValueMap {"0", "1", "2"},
Values {"Unknown", "Not Current", "Current"} ]
uint16 FirmwareStatus;
[Description ("Firmware version on the Interface Card processor.") ]
string FirmwareVersion;
[Description ("State of Interface Card IFC."),
ValueMap {"0", "1", "2", "3", "4", "5", "6"},
Values {"Unknown", "OK", "Failed", "Warning",
"Unrecoverable", "Not Installed", "Not Available"} ]
uint16 IFCState;
[Description ("State of Interface Card ESH."),
ValueMap {"0", "1", "2", "3", "4", "5", "6"},
Values {"Unknown", "OK", "Failed", "Warning",
"Unrecoverable", "Not Installed", "Not Available"} ]