HP 3PAR SUSE Linux Enterprise Implementation Guide

Figure 1 Initiator FCoE to FC Target
Connect the SUSE host (FCoE initiator) ports to the FCoE-enabled switch and connect the HP 3PAR
StoreServ Storage (FC target) ports of a FC switch.
NOTE: For Figure 1 (page 17), the FCoE switch must be able to convert FCoE traffic to FC and
must also be able to trunk this traffic to the fabric that the HP 3PAR StoreServ Storage target ports
are connected to. FCoE switch VLANs and routing setup and configuration are beyond the scope
of this implementation guide. Consult your switch manufacturer's documentation for instructions of
how to set up VLANs and routing.
FCoE-to-FC Connectivity 17