HP 3PAR SUSE Linux Enterprise Implementation Guide

8. Reboot the server.
QLogic DD-Kits
Use the following procedure to update the driver during installation. QLogic provides DD-Kits (driver
update disk) for Novell SLES Linux platforms.
NOTE: Refer to the readme released with DD-Kits for steps.
1. Insert the SLES CD number 1 in CD drive and boot the system.
2. On the main installation screen, press F5 for SLES 10 SP3 or press F6 for SLES 11 and SLES11
SP1. The system prompts you to select Yes, No, or File.
3. Select Yes.
4. Select the installation option, then press Enter.
5. In response to the following prompt:
Please choose the driver update medium.
a. Make sure the DD-kit is inserted in proper drive (i.e., CD-ROM or Floppy).
b. Select appropriate drive (i.e. CD-ROM in case the DD-kit is ISO image), then press Enter.
This loads the driver update to the system.
6. If the driver update was successful, the following message displays: Driver Update OK
7. Press Enter.
8. If the system prompts you to update another driver, click BACK, then press Enter. The following
message displays:
Make sure that CD number 1 is in your drive.
9. Put SLES CD 1 in the drive and click OK.
10. Follow the on-screen instructions.
QLogic DD-Kits 71