HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

A physical disk drive has failed and requires replacement.
STATE 5
Write Label Failed
SUGGESTED ACTION
The PD specified in the alert has been marked failed because the disk label could not be written
to the disk. Use the CLI command showpd <pd_id> to confirm the disk is still in this state.
A physical disk drive has failed and requires replacement.
STATE 6
Read Label Failed
SUGGESTED ACTION
The PD specified in the alert has been marked failed because the disk label could not be read from
the disk. Use the CLI command showpd <pd_id> to confirm the disk is still in this state.
A physical disk drive has failed and requires replacement.
STATE 7
Prolonged Not Ready
SUGGESTED ACTION
The PD specified in the alert has been marked failed because it has been marked not ready for
more than 20 minutes. Use the CLI command showpd <pd_id> to confirm the disk is still in this
state.
1.
2.
3.
An event has occurred on your system which requires attention. Please contact your authorized
support provider for assistance.
STATE 8
Invalid Media
SUGGESTED ACTION
The PD specified in the alert has been marked media-failed. Use the CLI command showpd
<pd_id> to confirm the disk is still in this state. A disk might be marked failed because the media
on certain sectors is marked bad. Other reason codes below might help in further analysis of why
the disk has its media marked invalid.
An event has occurred on your system which requires attention. Contact your local service provider
for technical support and services.
STATE 9
Smart Threshold Exceeded
116 Alerts