HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

SUGGESTED ACTION
A disk might be marked media-failed if it has been reporting disk aborts with error code 21 to
specify that the threshold for SMART errors has been exceeded. Contact your local service provider
to replace the disk.
A physical disk drive has failed and requires replacement.
STATE 10
Multiple Chunklets Media Bad
SUGGESTED ACTION
A disk might be marked media-failed because more than six chunklets on that disk have reported
media-errors. Contact your local service provider to replace the disk.
A physical disk drive has failed and requires replacement.
STATE 11
Media Failed
SUGGESTED ACTION
A disk will be marked media-failed if a hardware error or a device is bad error is reported by the
disk. Contact your local service provider to replace the disk.
A physical disk drive has failed and requires replacement. .
STATE 12
Increased Error Count
SUGGESTED ACTION
A disk will be marked media-failed if there has been an increase of more than 20 in the error
counts of the disk in the last 24 hours. Contact your local service provider to replace the disk.
A physical disk drive has failed and requires replacement.
STATE 13
No Valid Ports
SUGGESTED ACTION
The PD specified in the alert has been failed because it has no valid ports. Use the CLI command
showpd <pd_id> to confirm the disk is still in this state.
An event has occurred on your system which requires attention. Please contact your authorized
support provider for assistance.
STATE 14
New Offloop
SUGGESTED ACTION
The drive was issued a command by the Sysmgr to take a PD offloop. No action required.
STATE 15
New Onloop
117