HP 3PAR InForm OS 3.1.1 Messages and Operators Guide
MESSAGE CODE
0x00e0002
TYPE
System manager cannot startup
MESSAGE 1
Cannot reach TOC quorum. Use 'setsysmgr' to set system manager startup
state.
SUGGESTED ACTION
Attempt to get as many of the physical disks online as possible before proceeding.
If the system software has not been recently upgraded, run showsysmgr to gather more information
about the problem and a list of valid TOCs.
NOTE: The Table of Contents (TOC) generation number is an identifying number that
distinguishes each modified version of the TOC from its predecessor. Normally, the largest numbered
generation is the one that is valid.
MESSAGE 2
TOC quorum found for TOC <TOC_generation_number>, but waiting for nodes
<node_ids> to boot up. If the nodes are offline, use 'setsysmgr tocgen
<TOC_generation_number>'.
SUGGESTED ACTION
Some nodes have not joined the cluster. Try to rejoin the nodes to the cluster. If this fails, run
setsysmgr tocgen <TOC_generation_number>, where <TOC_generation_number>
is shown in the alert.
MESSAGE 3
TPD system is waiting for manual startup. Use 'setsysmgr' to set system
manager startup state.
SUGGESTED ACTION
The file /manualstartup has been created on one or more nodes. Remove it from all nodes
and run setsysmgr to proceed. Normally, running setsysmgr tocgen starts the system.
MESSAGE 4
Cannot reach TOC quorum for TOC <TOC_generation_number>. Use 'setsysmgr'
to set system manager startup state.
SUGGESTED ACTION
The specified TOC generation number cannot be found on 60% of the physical disks. If that many
physical disks are up and in a valid state, you can force the system to use a specific TOC generation
number using setsysmgr tocgen <TOC_generation_number>.
MESSAGE 5
TOC quorum found for TOC <TOC_generation_number>, but waiting for nodes
<node_ids> to boot up because we need to recover from a previous
138 Alerts