HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

Figure 13 Numbering for Dual-Port Fibre Channel Adapters in the Controller Node PCI Slots
Each Fibre Channel adapter in a PCI slot has four ports. Each iSCSI adapter in a PCI slot has two
or four ports. PCI adapters assume the numbers of the PCI slots they occupy.
In dual-port adapters, ports are labeled port 1 and 2, from top to bottom.
In quad-port Fibre Channel adapters, the ports are numbered port 1–4, from top to bottom.
Inside the controller node are control cache DIMMs and data cache DIMMs.
Control cache DIMMs are located in control cache slots 0 and 1 (Figure 14 (page 19)).
Data cache DIMMs are located on data cache riser cards (Figure 14 (page 19)).
18 Component Numbering for T-Class Storage System