HP 3PAR InForm OS 3.1.1 Messages and Operators Guide
MESSAGE 6
Midplane FPGA_<fpga> POST Fail: <code>.
SUGGESTED ACTION
An internal midplane hardware error has been detected. Two or more communication channels
have been disabled. Replace the midplane.
Contact your authorized support provider for assistance if required.
MESSAGE 7
Firmware panic due to unknown CPU interrupt. Panic count is <count>
(<code>).
SUGGESTED ACTION
Internal midplane hardware error. If you receive this alert, then cage completed self recovery.
Contact your authorized support provider for assistance if required.
MESSAGE 8
Firmware panic due to disk presence assertion. Panic count is <count>
(<code>).
SUGGESTED ACTION
Internal midplane hardware or software error. If you receive this alert, then cage completed self
recovery. Upgrade cage firmware. Replace the midplane.
Contact your authorized support provider for assistance if required.
MESSAGE 9
Firmware panic due to watchdog timeout. Panic count is <count> (<code>).
SUGGESTED ACTION
Internal midplane hardware or software error. If you receive this alert, then cage completed self
recovery. Upgrade cage firmware.
Contact your authorized support provider for assistance if required.
MESSAGE 10
Firmware panic due to CPU exception. Panic count is <count> (<code>).
SUGGESTED ACTION
Internal midplane hardware or software error. If you receive this alert, then cage completed self
recovery. Upgrade cage firmware.
Contact your authorized support provider for assistance if required.
MESSAGE 11
Firmware panic due to PMC read failure. Panic count is <count> (<code>).
SUGGESTED ACTION
Internal midplane hardware or software error. If you receive this alert, then cage completed self
recovery. Upgrade cage firmware.
187