HP 3PAR InForm OS 3.1.1 Messages and Operators Guide
Contact your authorized support provider for assistance if required.
MESSAGE 12
Firmware panic due to PMC write failure. Panic count is <count> (<code>).
SUGGESTED ACTION
Internal midplane hardware error. If you receive this alert, then cage completed self recovery.
Upgrade cage firmware.
Contact your authorized support provider for assistance if required.
MESSAGE 13
Firmware panic due to generic POST failure. Panic count is <count>
(<code>).
SUGGESTED ACTION
Internal midplane hardware error. If you receive this alert, then cage completed self recovery.
Upgrade cage firmware.
Contact your authorized support provider for assistance if required.
MESSAGE 14
Firmware panic due to SRAM test failure. Panic count is <count> (<code>).
SUGGESTED ACTION
Internal midplane hardware error. If you receive this alert, then cage completed self recovery.
Upgrade cage firmware.
Contact your authorized support provider for assistance if required.
MESSAGE 15
Midplane PMC <ID> Revision <rev> not supported.
SUGGESTED ACTION
Internal midplane hardware error.
Contact your authorized support provider for assistance if required.
MESSAGE 16
POST IRQ Init <error> <code>.
SUGGESTED ACTION
Internal midplane hardware error. Interrupts could not be initialized. Replace the midplane.
Contact your authorized support provider for assistance if required.
MESSAGE 17
POST UART SIO Init <error> <code>.
SUGGESTED ACTION
Internal midplane hardware error. Interrupts could not be initialized.
Contact your authorized support provider for assistance if required.
188 Alerts