HP 3PAR InForm OS 3.1.1 Messages and Operators Guide
MESSAGE CODE
0x01e0002
TYPE
Invalid cage configuration
MESSAGE 1
Cage <cage_id> (wwn 0x<cage_wwn>) is not directly attached to node on
either loop
MESSAGE 2
Cage <cage_id> (WWN <cage_wwn>) is paired with different partners. SideA
with <cage_name> and sideB with <cage_name>
MESSAGE 3
Can’t tell cage order on port <node:port:slot>
MESSAGE 4
More than 2 cages reported port <node:port:slot>
MESSAGE 5
<cage_id> reported twice on port <node:port:slot>. This means that both
loops of this cage are daisy chained together
MESSAGE 6
<port_number> of <cage_id> on both ports <node:port:slot> and
<node:port:slot>.
MESSAGE 7
DC2 <cage_name> in daisy chain config with <cage_name> on port
<node:port:slot>.
MESSAGE 8
<cage_name> in daisy chain config with <cage_name> on port
<node:port:slot>. Mixed cage types are not allowed in daisy chain
configuration
MESSAGE 9
DC2/DC4 cage <cage_name> in daisy chain config with cage <cage_name >on
port <node>:<port>:<slot>. DC2/DC4 cages are not allowed to be in daisy
chain configuration.
MESSAGE 10
Port <A/B> of cage <cage_id> (wwn 0x<cage_wwn>) on both ports
<node>:<port>:<slot> and <node>:<port>:<slot>
197