HP 3PAR InForm OS 3.1.1 Messages and Operators Guide
MESSAGE CODE
0x01f00de
TYPE
Component state change
MESSAGE
Disk <wwn_id> Degraded (<list of states>)
STATE 1
Errors on A Port
SUGGESTED ACTION
One of the possible errors leading to a disk being marked failed is a disk port reporting errors.
Use the CLI command showpd <pd_id> to confirm the disk is still in this state. If both ports are
reporting errors, then another alert is posted specifying No Valid Ports on that disk.
STATE 2
Errors on B Port
SUGGESTED ACTION
One of the possible errors leading to a disk being marked failed is a disk port reporting errors.
Use the CLI command showpd <pd_id> to confirm the disk is still in this state. If both ports are
reporting errors, then another alert is posted specifying No Valid Ports on that disk.
STATE 3
Disabled A Port
SUGGESTED ACTION
The PD specified in the alert has one of its ports marked as disabled.
Contact your local service provider for technical support and services.
STATE 4
Disabled B Port
SUGGESTED ACTION
The PD specified in the alert has one of its ports marked as disabled.
Contact your local service provider for technical support and services.
STATE 5
Notready
SUGGESTED ACTION
The PD specified in the alert has reported it being not ready. Use the CLI command showpd
<pd_id> to confirm the disk is still in this state.
This state might be temporary and might fix itself on retries.
Contact your local service provider for technical support and services.
206 Alerts