HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

STATE 6
Missing
SUGGESTED ACTION
The PD specified in the alert has been missing on both ports. Use the CLI command showpd
<pd_id> to confirm the disk is still in this state.
This state might be temporary and might fix itself on retries.
Contact your local service provider for technical support and services.
STATE 7
Missing A Port
SUGGESTED ACTION
The PD specified in the alert has its A port missing. Use the CLI showpd <pd_id> to confirm it is
still in this state.
If the disk has disappeared from the A loop, it reports its A loop as missing. This could also occur
because of a servicemag operation or a controlmag offloop operation.
Contact your local service provider for technical support and services.
STATE 8
Missing B Port
SUGGESTED ACTION
The PD specified in the alert has its B port missing. Use the CLI showpd <pd_id> to confirm it is
still in this state.
If the disk has disappeared from the B loop,it reports its B loop as missing. This could also occur
because of a servicemag operation or a controlmag offloop operation.
Contact your local service provider for technical support and services.
STATE 9
Relocating
SUGGESTED ACTION
This is only an activity flag which refers to the fact that chunklets from the disk are relocating. The
relocations could be because of an active service operation or because of intermittent disturbances.
No further action is required.
STATE 10
Servicing
SUGGESTED ACTION
This is a disk activity flag indicating the disk is being serviced. This flag will be set if a servicemag
or a servicecage operation is active on the disk.
STATE 11
Prolonged Missing A Port
207