HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

MESSAGE CODE
0x03500fa
TYPE
Component State Change
MESSAGE
Cage <cage_name> Magazine <mag_id> Failed (<list of states>)
STATE 1
Missing
SUGGESTED ACTION
A drive mag is missing from the cage. Check if the drive mag is properly inserted into the cage.
STATE 2
Offloop, Loop Failure
SUGGESTED ACTION
Use CLI commandshowcage -d to confirm the drive mag loop is failing. Check if the drive mag
is properly inserted into the cage.
Use CLI command showpd -degraded and showpd -failed to verify disk failure.
STATE 3
Offloop, Requested Via Serial Console
SUGGESTED ACTION
A bypass was issued from the cage serial console. Undo the bypass of the drive magazine using
the controlmag command.
STATE 4
Midplane I2C Transaction Failure
SUGGESTED ACTION
Communication between I2C to cage magazine is down. Check and confirm problem and replace
the drive magazine.
273