HP 3PAR InForm OS 3.1.1 Messages and Operators Guide
MESSAGE CODE
0x03700fa
TYPE
Component state change
MESSAGE
Remote Copy Volume <remote_copy_volume_id> <volume_name> Failed (<list
of states>)
STATE 1
Write To Secondary Volume Failed
SUGGESTED ACTION
This message means that there was an error attempting to write to a secondary volume, and thus
the primary side volume group was stopped. Determine what caused the write error was and
attempt to repair the problem and restart the group.
STATE 2
Sync Failed
SUGGESTED ACTION
Indicates an attempt to synchronize a remote copy volume has failed. Try and determine why this
occurred, i.e. volume group was stopped by a CLI command, there was a network failure, a write
error on the secondary volume, etc., and correct the problem. Once the problem is resolved, the
volume can be synchronized using syncrcopy.
277