HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

MESSAGE CODE
0x03a00fa
TYPE
Component state change
MESSAGE
Remote Copy Link <remote_copy_link:link_id> <sysmgr_name> Failed (<list
of states>)
STATE 1
Down Due To Send Error Or Missing Heartbeat
SUGGESTED ACTION
The remote copy link has been disconnected. This could be the result of a CLI command (any
command that stops a link) or it could be the result of an actual network failure or loss of the remote
system. In the latter case, the customer should attempt to determine what caused the network failure
and attempt to correct the situation.
STATE 2
Multiple Link Down Errors Within 24 Hours
SUGGESTED ACTION
Check your physical link connection. Issue a CLI command showrcopy-links to verify the link
is down.
Contact your local service provider for technical support and services.
STATE 3
Link Has Been Down For More Than 4 Hours
SUGGESTED ACTION
Check your physical link connection. Issue a CLI command showrcopy-links to verify the link
is down.
Contact your local service provider for technical support and services.
Replace internal drive as soon as possible.
A controller node in your system has reported a problem and may require replacement.
MESSAGE 2
Attribute Data read fail: disk <hda> cannot read SMART data'
SUGGESTED ACTION
Replace internal drive as soon as possible.
A controller node in your system has reported a problem and may require replacement.
MESSAGE 3
Error Log read failure: disk <hda> Error Log Fail
283